8621... Adjusting hood pretension - Camloc fastener with spacers: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
At least two persons are needed to install and remove the hood. Before installing and removing the hood, secure the BMW multitrailer and the entire combination against rolling. For this purpose, use the parking brake and the chocks of the BMW multitrailer.
To help adjust the hood pretension, you will need four blocks with a minimum height of 60 mm.
To help adjust the hood pretension, you will need four blocks with a minimum height of 60 mm.