8610... Removing entry profile section on loading ramp, left, right and center

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.

Drill out rivets (1). Remove entry profile section (2) towards front.

Fig 1: Identification Entry Profile Section With Rivets

Courtesy of BMW OF NORTH AMERICA, INC.