Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
- Release FLUID RESERVOIR FOR WINDSCREEN WASHER SYSTEM and pull out
NOTE:
Catch any escaping washer fluid if necessary.
Disconnect plug connection (2).
Detach hose from windscreen washer pump (1).
Turn windscreen washer pump (1) and pull in direction of arrow out of fluid reservoir for windscreen washer unit.
Installation:
- Replace strainer for windscreen washer pump
- Coat sealing ring of windscreen washer pump with antiseize agent
- Lay hose of windscreen washer pump without kinks
- Fill fluid reservoir