Special tool for crimping
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
Double flat spring contact:
Crimping tool special tool 61 0 202 (crimping tool) with special tool 61 0 230 (matrix)
PINS REFERENCE CHART
| (09/2006 - 03/2009) | |||
|---|---|---|---|
| Previously AHM3(+) | New AHM4R | ||
| Pin no. | Contact (mm2 ) | Pin no. | Contact (mm2 ) |
| 1 | 2.8 | 13 | 2.8 |
| 2 | 2.8 | 20 | 2.8 |
| 3 | 0.63 | - | - |
| 4 | 0.63 | 17 | 0.63 |
| 5 | 0.63 | 2 | 0.63 |
| 6 | 0.63 | 3 | 0.63 |
| 7 | 0.63 | 11 | 0.63 |
| 8 | 0.63 | 9 | 0.63 |
| 9 | 0.63 | 10 | 0.63 |
| 10 | 0.63 | 18 | 2.8 |
| Re-crimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 11 | 0.63 | 14 | 2.8 |
| Re-crimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 12 | 0.63 | 15 | 2.8 |
| Re-crimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 13 | 0.63 | 19 | 2.8 |
| Re-crimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 14 | 0.63 | 12 | 2.8 |
| Re-crimp contact from 0.63 mm2 to 2.8 mm2 | |||
| 15 | 0.63 | 16 | 0.63 |
| 16 | 0.63 | 1 | 2.8 |
| Re-crimp contact from 0.63 mm2 to 2.8 mm2 | |||
| - | - | 4-8 | 0.63 |
Carry out VEHICLE PROGRAMMING/ENCODING .