6135095 Removing and installing/replacing control unit/module for seat heating
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .
NOTE:
Move seat completely towards rear/top.
Disconnect plug connection (1).
Open lock (2) in direction of arrow and remove control unit/module for seat heating (3) towards bottom.
Installation:
Make sure control unit/module for seat heating (3) is correctly engaged.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .
NOTE:
Move seat completely towards rear/top.
Disconnect plug connection (1).
Open lock (2) in direction of arrow and remove control unit/module for seat heating (3) towards bottom.
Installation:
Make sure control unit/module for seat heating (3) is correctly engaged.