LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2692 (General Electrical System - Repair - E90) >> 6121 Battery/Vapor Separator >> 6121010 Removing and installing or replacing battery >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Unlock positive terminal cover (1) and remove.

Fig 1: Unlocking Positive Terminal Cover
G04727573Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Do not under any circumstances pull/lever safety battery terminal off by force.
Battery crash element must be reinstalled!
  • On vehicles from build date 12/2006 or when IBS is replaced since 12/2006, battery crash element has been removed without replacement (IBS2006 replaces IBS2004 from 12/2006)

Detach vent (1) in direction of arrow.

Release nut (6) of safety battery terminal (2).

Tightening torque 61 21 1AZ .

Detach safety battery terminal (2) towards top, lay to one side and secure.

Release threaded pin (5) and remove holder with battery crash element (4).

Fold back both bar fasteners (3) and pull battery towards rear out of associated fixture.

Lift out battery.

Installation: 

Make sure battery is correctly seated in associated fixture.

Fig 2: Detaching Vent
G04727574Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: