Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Remove FLAP IN LUGGAGE COMPARTMENT PANEL on right
Disconnect BATTERY NEGATIVE LEAD

Release screws (1) and remove bracket (2). Tightening torque 61 14 1AZ .

Fig 1: Identifying Screws And Bracket

G04727564

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock plug housing (2) and release in direction of arrow.

Fold up covers on nuts (3).

Unscrew nuts (3). Tightening torque 61 21 2AZ .

Disconnect plug connection (4).

Disconnect plug connection of IBS cable (5).

Fig 2: Releasing Plug Housing

G04727565

Courtesy of BMW OF NORTH AMERICA, INC.

Press locking brackets (2) downwards and unclip.

If necessary, using a screwdriver (1), expand locking bracket (2) at lower end and clip out.

Remove power distributor (3) towards top.

Fig 3: Removing Power Distributor

G04727566

Courtesy of BMW OF NORTH AMERICA, INC.