00 00 006 Vehicle test
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Connect diagnosis system to diagnostic socket.
Switch the ignition on.
Carry out vehicle identification.
Click on brief test.
The vehicle test is carried out.
NOTE:
For motor vehicle diagnosis, the brief test is essential for evaluating possible stored fault codes. In the vehicle test, the control units are physically identified in succession and their fault memories read out.
If the fault memory has been read out, the faults appear in the "Fault pattern selection" mask in the "Fault memory contents" field.