41 35 Side walls
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SIDE WALLS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front side panel to body | E63/E64 | M6x22 10.9 | 12 Nm | |
| E83 | ST6.3x14 | 7 Nm | ||
| E60/E61/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93/E84 | M6 | 7.6 Nm | ||
| E89 | M6 | 8 Nm | ||
| 2AZ Front side panel to body | E63/E64 | M6 nut | 5 Nm | |
| E60/E61 | M6 nut | 7.6 Nm | ||
| E89 | M6 nut | 8 Nm | ||
| 3AZ Front side panel to body | E60/E61 | Sheet metal screw ST4.8x19 | 7.6 Nm | |
| 4AZ Combination holder, side panel, front, to body | E81/E82/E87/E88/E92 | M6 | 7.6 Nm | |
| 5AZ Rear side panel to body | E85/E86/E89 | M6 | 7.6 Nm | |
| 6AZ Side panel, front, to module carrier/bumper carrier | E70/E71/E72 | M6x16 | Replace bolts | 4 Nm |
| 7AZ Front side panel to body Area, A-pillar |
E70/E71/E72 | M6x16 | Replace bolts | 8 Nm |
| 8AZ Front side panel to body Area, sill |
E70/E71/E72 | Sheet metal screw ST4.8x19 |
Replace bolts | 2.5 Nm |
| 9AZ Front side panel to body | E70/E71/E72 | M5x20 | Replace bolts | 5 Nm |
| 10AZ Module carrier, top, to Carrier support |
E70/E71/E72 | M6x26 | Replace bolts | 8 Nm |
| 11AZ Module carrier, bottom, to engine support | E70/E71/E72 | M6 nut | 7 Nm |