3321001 Removing and installing/replacing left output shaft
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of burning on the exhaust system!
Necessary preliminary tasks
- Remove tension strut if necessary
- Lower EXHAUST SYSTEM IN REAR AREA
The subsequent procedure is described in the document "REMOVING AND INSTALLING OR REPLACING RIGHT OUTPUT SHAFT ".