33 21 Output Shaft
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft to rear axle final drive drive flange (Torx screw with RIBBED TEETH ) |
E81/E82/E87/E90/E91/E92/E93 | M8 | Replace screws | 52 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 ZNS3 | Replace screws | 70 Nm | ||
| E87 | M10 ZNS | Replace screws | 80 Nm | ||
| E90/E92/E93/S65 | M12 | Replace screws | 120 Nm | ||