11 12 Cylinder Head with Cover S62
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER SPECIFICATIONS
| Cylinder head height (The cylinder head sealing surface must not be remachined) | mm | 140.0 |
| Valve guides are not available as replacement parts. | ||
| Valve guide interior diameter (installed) | ||
| Standard | mm | 6.0 H7 |
| Size 1 | mm | 6.1 H7 |
| Max. tilt clearance (wear between valve and valve guide) | mm | 0.5 |
| Camshaft bearing | ||
| Width of bearing thrust (cylinder head) | mm | 21.93 -0.04 |