31 35 Stabiliser Bar
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STABILISER BAR
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabiliser to front axle carrier | E81/E82/E84/E87/E90/E88/E91/E92/E93 | M8 | Replace nuts | 21 Nm |
| E90/Allrad, E91/Allrad, E92/Allrad | M10 | Replace screws | 60 Nm | ||
| E84/Allrad | M10 | Replace screws | 56 Nm | ||
| 2AZ | Stabiliser link to stabiliser/spring strut shock absorber | E81/E82/E87/E88/E90/E91/E92/E93 | M10 | Replace nut | 58 Nm |
| E84 | M10 | Replace nut | 56 Nm | ||