25 16 Shift Console - Automatic Transmission
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SHIFT CONSOLE - AUTOMATIC TRANSMISSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Bowden cable to shift tower/transmission | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E81/E82/E88 | 15 Nm | ||
| 2AZ | Clamping screw on shift lever | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 10 Nm | ||
| 3AZ | Shift console to tunnel | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92/E93/E81/E82/E88/E89/E84 | 7 Nm | ||
| 4AZ | Switch to shift console | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86/E87/E90/E91/E92 | 4.5 Nm | ||
| 5AZ | Interlock cable to shift tower | E36/E38/E39/E46/E53/E60/E61/E63/E64/E65/E66/E67/E68/E83/E85/E86 | 7 Nm | ||
| 6AZ | Cable retaining tab to transmission | E91/E92 4WD | M8X18 | 19 Nm | |
| 7AZ | Oval-head screw for emergency release device | E60, E61 | 1.6 Nm | ||
| 8AZ | Screw for adjusting cable on transmission | E60/E61/E81/E82/E83/E84/E87/E88/E90/E91/E92/E93 | With ball head | 13 Nm | |
| 9AZ | Vulcanized support angle to transmission | E81/E82/E87/E88/E90/E91/E92/E93/E84 | M6 | 9 Nm | |