24 21 Input, Intermediate and Output Shafts
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - INPUT, INTERMEDIATE AND OUTPUT SHAFTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Flange nut, output flange | A5S 300J | 225 Nm | ||
| Flange nut, output flange without spring washer | A5S 360R | 30 Nm | |||
| Flange nut, output flange, with spring washer | A5S 360R/A5S 390R/A4S 200R | 60 Nm | |||
| A4S 270R/A4S 310R | 100 Nm | ||||