24 13 Transmission Extension, Bearings, Seals
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION EXTENSION, BEARINGS, SEALS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Slotted nut/output flange | A5S 310Z/A5S 440Z/A5S 560Z/A5S 325Z | 120 Nm | ||
| 2AZ | Double hexagon nut/output flange | GA6HP26Z | until 09/02 without sealing ring in output flange |
80 Nm | |
| GA6HP19Z/GA6HP26Z | from 09/02 with sealing ring in output flange |
60 Nm | |||
| 3AZ | Output shaft nut to output flange | GA6L45R | 22x1.5 | 55 Nm | |