24 11 Transmission Case, Oil Sump
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION CASE, OIL SUMP
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 8AZ | Oil filler pipe | 3HP-22 | 105 Nm | ||
| 4HP-22/4HP-24/A5S 310Z | 98 Nm | ||||
| 9AZ | Plug | A4S 200R/A4S 270R/A4S 310R/A5S 300J/A5S 310Z/A5S 325Z/A5S 440Z/A5S 560Z/A5S 360R/A5S 390R/GA6HP19Z/GA6HP26Z/GA6HP32Z | M18 | 43 Nm | |
| 10AZ | Oil duct screw plugs | A5S 300J | 8 Nm | ||
| A5S 310Z/A5S 560Z | 15 Nm | ||||
| 11AZ | Damper cover on transmission case | A5S 300J | M6 | 10 Nm | |
| 12AZ | Radial shaft seal to converter housing | A4S 270R/A4S 310R/A5S 360R/A4S 360R | M4 | 3 Nm | |
| 13AZ | Intermediate plate on intermediate housing | A4S 270R/A4S 310R | 5/16 inch | 25 Nm | |