23 21 Transmission Shafts
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION SHAFTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output flange | S5D 200G/S5D 250G/S5D260Z/S5D 310Z/S6S 420G | Collar nut installed with bolt cement Pretension |
190 Nm | |
| Release Tighten down | 120 Nm | ||||
| S5D 280Z/S5D 320Z | Collar nut installed with bolt cement Pretension |
170 Nm | |||
| Release Tighten down | 130 Nm | ||||
| S5D 390Z | Collar nut installed with bolt cement Pretension |
200 Nm | |||
| Release Tighten down | 145 Nm | ||||
| GS6-37BZ/GS6-17BG | Collar nut installed with bolt cement Pretension |
170 Nm | |||
| Release Tighten down | 120 Nm | ||||
| GS6-53DZ | Collar nut installed with bolt cement Pretension |
200 Nm | |||
| Release Tighten down | 140 Nm | ||||
| GS7S47BG | Collar nut installed with bolt cement | 200 Nm | |||
| 2AZ | Gear to countershaft | 265/Sport | M10 | 60 Nm | |