23 11 Case and Cover
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE AND COVER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 6AZ | Reverse gear shaft to case | B/C/D/E/F/G/H/I/7-speed SMG | M8 | 25 Nm | |
| S5D 310Z/S5D 320Z | M8 | 20 Nm | |||
| B/C/D/E/F/G/H/I/7-speed SMG | M10 | 45 Nm | |||
| 7AZ | Support for reverse gear shaft | B/C-transmission | M8 | 25 Nm | |
| 8AZ | Bearing holder to rear housing section | B/C-transmission | M6 | 10 Nm | |
| 9AZ | Retaining tabs for sealing cap | C-transmission | M6 | 10 Nm | |
| 10AZ | Bearing on countershaft | B-transmission | M10 | 90 Nm | |
| C-transmission | M10 | 30 Nm | |||
| C-transmission | M10 | 60 Nm | |||