23 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission to engine, see TRANSMISSION DESIGNATIONS | ||||
| 6 KT-Screws | B/C/D/E/F/G/H/I/7 Speed SMG | M6 | 8 Nm | ||
| B/C/D/E/F/G/H/I/7 Speed SMG | M8 | 25 Nm | |||
| B/C/D/E/F/G/H/I/7 Speed SMG | M10 | 49 Nm | |||
| B/C/D/E/F/G/H/I/7 Speed SMG | M12 | 74 Nm | |||
| Torx-Screws | B/C/D/E/F/G/H/I/7 Speed SMG | M6 | 9 Nm | ||
| B/C/D/E/F/7 Speed SMG | M8 | 19 Nm | |||
| B/C/D/E/H/I/7 Speed SMG | M10 | 43 Nm | |||
| G-Gear | M10 | 38 Nm | |||
| 7 Speed SMG | M10x55 8.8 | 43 Nm | |||
| 7 Speed SMG | M10x42 8.8 | 42 Nm | |||
| Steel screws with a Torx-head | I/G/H-Gear | M8 | 19 Nm | ||
| Steel screws with a Torx-head | I/G/H-Gear | M12 | 66 Nm | ||
| 2AZ | Transmission to N52/N52K/N53/N54 aluminium screws/bolts are not magnetic. | I/G/H-transmission | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| I/G/H-transmission | M10x30 | Jointing torque | 20 Nm | ||
| Angle of rotation | 90-110° | ||||
| I/G/H-transmission | M10x85 | Jointing torque | 20 Nm | ||
| Angle of rotation | 180-200° | ||||
| I/H/G-transmission | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° +20 ° | ||||
| 3AZ | Cover plate, transmission | I/H-transmission | M6 | 8 Nm | |