21 21 Clutch Disc and Drive Plate
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Work instruction | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Clutch to flywheel | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 8.8 | Replace screws | 25 Nm |
| E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 10.9 | Replace screws | 34 Nm | ||
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | ||||
| S85/S65 | Jointing torque | 15 Nm | |||
| Torque angle | 25 ° | ||||
| N52/N53/N52K/M47T2/N45T/N54/N46T/N43/N45K/N47/M57T2/N47S/N62TU/N57 | M8 10.9 | Jointing torque | 15 Nm | ||
| Torque angle | 90° ± 5° | ||||