17 11 Radiator and Mounting Parts
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - RADIATOR AND MOUNTING PARTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Radiator to body | ||||
| self-tapping screw | All | B6.3 | 9 Nm | ||
| All | M6 | 10 Nm | |||
| 2AZ | Drain plug to radiator | All | 2.5 Nm | ||
| 3AZ | Temperature switch to radiator (91 °C/99 °C) max. | All | 15 Nm | ||
| 4AZ | Expansion tank to body | All | 9 Nm | ||
| M57TU/E65 | 4 Nm | ||||
| 5AZ | Radiator on module carrier | E46 | 4 + 1 Nm | ||
| 6AZ | Retaining plate, expansion tank, to radiator | E46 | 4 + 1 Nm | ||
| 7AZ | Fan cowl on radiator | E46 | 4 + 1 Nm | ||
| 8AZ | Plug in radiator (temperature switch omitted) | E36/7/M54 | M14 x 1.5 | 15 Nm | |
| 9AZ | Mounting plate to radiator | M57TU/E65 | 4.5 Nm | ||
| 10AZ | Radiator bracket | All | 2.5 Nm | ||