12 41 Starter motor with mounting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STARTER MOTOR WITH MOUNTING
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Starter motor mounting to crankcase | N52/N52K/N51/N53 | M10x85 | Replace screw | |
| Jointing torque | 20 Nm | ||||
| Torque angle | 180 ° | ||||
| 2AZ | Starter motor mounting to crankcase | N52/N52K/N51/N53 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | ||||
| Torque angle | 90 ° | ||||
| 3AZ | Battery positive lead to starter | N52/N52K/N51/N53 | M8 | 13 Nm | |