12 62 Coolant Temperature
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | 18 Nm | ||
| M51 | 13 Nm | ||||
| 2AZ | Temperature switch (5.5 °C/17 °C) to fuel filter/cylinder head | M21 | 18 Nm | ||
| 3AZ | Coolant temperature sensor (2-pin plug-in connection) | S38/S50 | 13 Nm | ||
| S85 | M12/1.52 | 13.5 Nm | |||
| All/others | 20 Nm | ||||
| 4AZ | Remote thermometer sensor (2-pin plug-in connection) | All | 20 Nm | ||
| Remote thermometer sensor (4-pin plug-in connection) | M62 | 16 Nm | |||
| S62 | M12 x 1.5 | 14 Nm | |||
| 5AZ | Remote thermometer sensor on coolant flange | S50 | 18 Nm | ||
| 6AZ | Temperature sensor - air | S38/S50 | 13 Nm | ||
| 7AZ | Temperature sensor - oil | S38/S50 | 13 Nm | ||