12 90 Control Unit Housing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CONTROL UNIT HOUSING
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Assembly of upper and lower sections | E32/E34/E36 | 5 Nm | ||
| 2AZ | Center section to body | E32/E34 | 3 Nm | ||
| 3AZ | Control unit holder in E box | E36 | 5 Nm | ||
| 4AZ | Control unit box cover | E38/E39/E52 | 4 Nm | ||
| E46 | 6 Nm | ||||
| E53/E36/7/E54 | 3 Nm | ||||
| 5AZ | Electronics box to firewall | E65 | Plastic screw | 6 Nm | |