11 36 Variable Camshaft Control
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N51 | M10x94 | Replace screw Jointing torque Torque angle |
20 Nm 180 ° |
| 2AZ Non-return valve VANOS to cylinder head | N51 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N51 | M6x12 | 8 Nm |