11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL SUMP
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Oil drain plug | N51 | M12 x 1.5 | 25 Nm | |
| 2AZ Oil sump on engine block Aluminum oil sump Aluminum screws/bolts are permitted with and without color coding (blue). |
N51 | M8x26 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
8 Nm 60 ° |
| 3AZ Oil sump on engine block Aluminum oil sump Aluminum screws/bolts are permitted with and without color coding (blue). |
N51 | M8x92 M8x112 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
180 ° 8 Nm |
| 5AZ Oil deflector to crankcase lower section Aluminum screws/bolts are permitted with and without color coding (blue). |
N51 | M6x20 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 90 ° |
| 6AZ Oil sump on engine block Sheet metal oil sump Aluminum screws/bolts are permitted with and without color coding (blue). |
N51 | M8x24 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
90 ° 8 Nm |
| 7AZ Oil sump on engine block Aluminum oil sump Aluminum screws/bolts are permitted with and without color coding (blue). (AWD) |
N51 | M8x36 M8x44 | Replace screws Thread repairs exclusively with Al Helicoil Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
90 ° 8 Nm |