11 41 Oil Pump with Strainer and Drive
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL PUMP WITH STRAINER AND DRIVE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Intake pipe to bedplate | N51 | M6x30 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 100 ° |
| 2AZ Oil pump to bedplate | N51 | M8x123 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
10 Nm 180 ° |
| N51 | M8x31 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
10 Nm 90 ° |
|
| 3AZ Chain module to crankcase and oil pump | N51 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 45 ° |
| 4AZ Sprocket to oil pump | N51 | M8 | Jointing torque Torque angle |
20 Nm 45 ° |
| 5AZ Triangular drive to oil pump | N51 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
4 Nm 45 ° |
| 6AZ Sealing plug to hydraulic valve | N51 | M6x16 | Replace screws Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
45 ° 4 Nm |