11 21 Crankshaft and Bearings

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS

	Type	Thread	Tightening specification	Measure
1AZ Torsion damper (hub) to crankshaft (central bolt 12.9)	N51	M16x80	Replace screws Lightly oil screws and threads Jointing torque Torque angle	100 Nm 360 °