11 12 Cylinder Head with Cover
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 328xi, 2010 BMW 328i, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD WITH COVER
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 11AZ Cylinder head cover | All | M6 | 10 Nm | |
| All | M7 | 15 Nm | ||
| M21 | M8 | 15 Nm | ||
| 12AZ Oil trap to cylinder head cover | M21 | M8 | 17 Nm | |
| 13AZ Timing case to cylinder head | All | M7 | 15 Nm | |
| All | M8 | 20 Nm | ||
| 14AZ Plug for oil channel (microencapsulated) | M47/M57 | M12 x 1.5 | 20 Nm | |
| 15AZ Vent plugs to cylinder head (coolant) | M67 | 2 Nm |