00 00 M16 and M16x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328i, 2010 BMW 323i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M16 AND M16X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 |
Surface color/(surface coating) | |||
| M16 thread | yellow (ZN) | M16 8.8 | 200 Nm | |
| silver (ZNS) | M16 8.8 | 160 Nm | ||
| yellow (ZN) | M16 10.9 | 280 Nm | ||
| silver (ZNS) | M16 10.9 | 235 Nm | ||
| yellow (ZN) | M16 12.9 | 340 Nm | ||
| silver (ZNS) | M16 12.9 | 260 Nm | ||
| M16x1.5 thread | yellow (ZN) | M16 x 1.5 8.8 | 216 Nm | |
| silver (ZNS) | M16 x 1.5 8.8 | 170 Nm | ||
| yellow (ZN) | M16 x 1.5 10.9 | 303 Nm | ||
| silver (ZNS) | M16 x 1.5 10.9 | 250 Nm | ||
| yellow (ZN) | M16 x 1.5 12.9 | 364 Nm | ||
| silver (ZNS) | M16 x 1.5 12.9 | 275 Nm |