3200... Moving vehicle into normal position
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Check compliance with TEST CONDITIONS , bring vehicle to a stop if necessary.
- Version with air spring system: Carry out ride-height calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to CHASSIS/WHEEL ALIGNMENT - NORMAL POSITION E90, E91/LCI
- Determine vehicle ride height. See 3133095 MEASURING RIDE-LEVEL HEIGHT OF VEHICLENOTE: If the vehicle ride height is not inside the tolerance (refer to Technical Data See REAR AXLE - RIDE HEIGHT E90 or FRONT AXLE - RIDE HEIGHT ), the vehicle must be repaired (coil spring/leakage).