Storage Location

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Consisting of:

2 = 0492351 Spindle

NOTE: (Spindle) Series: E28 Replaced by 33 4 301 (0 496 535)

8 = 0492357 Nut

NOTE: (Nut with bearing) Series: E28 Replaced by 33 4 302 (0 496 536)

5 = 0492354 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 518, 520i

7 = 0492356 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 525i, 528i

9 = 0492358 Nut

NOTE: (nut)

1 = 0492350 Bell housing

NOTE: For counter support when removing the rear wheel bearing

= 0492352

Fig 1: Identifying Tool (334030)

NOTE: (Tool set) For removing and installing rear wheel bearings Components 33 4 032, 33 4 038 and 33 4 039 are discontinued and are replaced in the order by 33 4 301, 33 4 302 and 33 4 303

Consisting of:

2 = 0492351 Spindle

NOTE: (Spindle) Series: E28 Replaced by 33 4 301 (0 496 535)

8 = 0492357 Nut

NOTE: (Nut with bearing) Series: E28 Replaced by 33 4 302 (0 496 536)

5 = 0492354 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 518, 520i

7 = 0492356 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 525i, 528i

9 = 0492358 Nut

NOTE: (nut)

1 = 0492350 Bell housing

NOTE: For counter support when removing the rear wheel bearing

3 = 0492352 Washer

NOTE: (thrust washer) For removing wheel bearing, rear/Series: E28/model: 518, 528i

4 = 0492353 Sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/Series: E28/model: 518, 520i

6 = 0492355 Sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/Series: E28/model: 525i, 528i