0491536 232000 MW Puller

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball-bearing extractor 6206) 9 ball bearings with steel cage - For pulling out the grooved ball bearing of the transmission drive shaft

Consisting of:

1 = 0491537 Claw

NOTE: (Claw for Rillex 6206 (9 x))

Fig 1: Identifying Puller (232000)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0491538 Holding sleeve

NOTE: (Union sleeve)

3 = 0491539 Spindle

NOTE: (pressure spindle)