0491522 231400 MW Device

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For inserting the radial seal ring in the plug socket of the speedometer-drive pinion

Consisting of:

1 = 0491523 Shaft

NOTE: (Press-in shaft)

2 = 0491524 Shaped part

NOTE: (shaped part)

3 = 0491525 Holding sleeve

NOTE: (Union sleeve)

Fig 1: Identifying Device (231400)

Courtesy of BMW OF NORTH AMERICA, INC.