23 11 614 Replacing guide tube for clutch release unit (GS6- 53BZ) (S85/S65): Installation

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Clean thread.

Install screws with Loctite 243.

Tightening torque 23 11 2AZ .

Fig 1: Locating Guide Tube Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Identifying Sticker

Courtesy of BMW OF NORTH AMERICA, INC.