00 00 M16 and M16x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - M16 AND M16X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Measure | |
|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface color/(surface coating) | ||
| M16 thread | yellow (ZN) | M16 8.8 | 200 Nm |
| silver (ZNS) | M16 8.8 | 160 Nm | |
| yellow (ZN) | M16 10.9 | 280 Nm | |
| silver (ZNS) | M16 10.9 | 235 Nm | |
| yellow (ZN) | M16 12.9 | 340 Nm | |
| silver (ZNS) | M16 12.9 | 260 Nm | |
| M16x1.5 thread | yellow (ZN) | M16 x 1.5 8.8 | 216 Nm |
| silver (ZNS) | M16 x 1.5 8.8 | 170 Nm | |
| yellow (ZN) | M16 x 1.5 10.9 | 303 Nm | |
| silver (ZNS) | M16 x 1.5 10.9 | 250 Nm | |
| yellow (ZN) | M16 x 1.5 12.9 | 364 Nm | |
| silver (ZNS) | M16 x 1.5 12.9 | 275 Nm |