0495599 244360 Puller Minimum set: Mechanical tools MW

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For withdrawing radial shaft seal of output shaft (4 x 2).

Storage Location

A24

SI number

01 02 07 (334)

Fig 1: Identifying Puller (244360)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0496113 Basic body

2 = 0496114 Claw

NOTE: (Claw (4 x))

3 = 0496115 Screw

4 = 0496116 Spindle