0495496 244320 MW Puller

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For withdrawing output shaft seal (four-wheel drive).

SI number

01 02 07 (334)

Consisting of:

1 = 0495569 Basic body

2 = 0495570 Ring

NOTE: (Retaining ring)

Fig 1: Identifying Puller (244320)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0495571 Spindle

4 = 0495572 Hook wrench