61 31 115 Replacing rocker switch for power window operation

WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 321

Driver's and passenger sides:

Lever out switch unit (1) with special tool 00 9 321 and remove.

Fig 1: Levering Out Switch Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection(s).

NOTE: Retaining clips (1) may catch under door trim panel while switch unit is levered out.

Fig 2: Locating Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, remove door trim panel. Refer to 51 41 000 REMOVING AND INSTALLING LEFT OR RIG .

Driver's side only:

Loosen screws (1).

Disconnect toggle switch for window operation (2) from switch for door mirror (3).

Fig 3: Disconnecting Toggle Switch

Courtesy of BMW OF NORTH AMERICA, INC.