Necessary preliminary tasks
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
- Remove rear underbody protection
GS6-17DG/BG and GS6-37DG/BG transmissions only.
Disconnect plug connection (1) on reverse gear switch.
Remove reverse gear switch.
Tightening torque 23 14 1AZ.
NOTE:
Illustration similar
Fig 1: Identifying Plug Connection On Reverse Gear Switch (GS6-17DG/BG And GS6-37DG/BG Transmission)
GS6-53DG/BG transmission only
Disconnect plug connection (1) on reverse gear switch.
Remove reverse gear switch.
Tightening torque 23 14 1AZ.
NOTE:
Illustration similar