Special tools required
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The transmission retaining bridge 24 0 200 is suitable for both manual and automatic transmissions
IMPORTANT:
Adapters and spindles must be adapted for positive locking to the transmission.
(Risk of injury)
Adapt adapters (1) and spindle with thrust piece (3) to transmission.
Adapt length with slide (2).
Screw in spindle (4).
IMPORTANT:
Before mounting on assembly stand 00 1 450, check retaining bridge for secure seating.