Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Remove CONDENSER
Remove cooling loop for power steering. See REMOVING AND INSTALLING/RENEWING COOLING LOOP FOR POWER STEERING .

NOTE: Texts refer to and illustrations show the left side. The procedure is identical for the right side.

Release bolt.

Tightening torque 17 11 1AZ .

Fig 1: Locating Radiator Bracket Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Remove holder (1).

Fig 2: Removing Holder

Courtesy of BMW OF NORTH AMERICA, INC.