LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2596 (Cooling System - Repair - N52 - E90) >> 1700 Coolant, Checking Cooling System >> 17 00 039 Venting cooling system and checking for water leaks (N52/N52K/N51/N53) >> Adding coolant

Adding coolant

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Open vent screw (1).

Slowly fill coolant expansion tank up to lower edge of filler neck with RECOMMENDED COOLANT .

MIXTURE RATIO .

Close vent screw (1) until bubble-free coolant emerges.

Have a cleaning cloth ready and mop up emerging coolant.

Close cap on expansion tank.

Fig 1: Identifying Vent Screw
G04751515Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals