Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

E91/E92/E93/E82/E88 only: Remove tension strut on rear axle.

Support exhaust system with jack and special tool 31 2 220 and secure against falling out.

Fig 1: Supporting Exhaust System With Jack And Special Tool (31 2 220)

G04778255

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts.

Installation:

Replace self-locking nuts.

Replace seal.

Tightening torque 18 20 1AZ .

Fig 2: Locating Self-Locking Nuts

G05758981

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolt and remove bracket (1).

Installation:

Tightening torque 18 20 2AZ .

Fig 3: Locating Bracket Bolt

G05502233

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screw connection.

Installation:

Tightening torque 18 20 3AZ .

Fig 4: Locating Bracket Screw

G05476210

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten nut.

Installation:

Tightening torque 18 20 4AZ .

Fig 5: Locating Nut

G05758984

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw on right bracket.

Installation:

Tightening torque 18 20 5AZ .

Fig 6: Locating Bracket Screw

G05476212

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolts along line and remove reinforcement plate (1).

Lower exhaust system and remove.

Fig 7: Identifying Reinforcement Plate

G05502234

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check exhaust system for leaks.