Illustration shows cylinder head cover
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Release screws and remove holder (1).
Tightening torque 12 52 1AZ .
CYLINDER HEAD COVER ILLUSTRATION CHART
| Work step | Note |
|---|---|
| Unlock plug connections on control sensors and disconnect | |
| Unlock plug on alternator and disconnect | |
| Unlock plug connection on knock sensors and disconnect | |
| Unlock plug on crankshaft sensor and disconnect | |
| Unlock plug on starter motor and disconnect | |
| Unlock plug connections on monitor sensors and disconnect | |
| Unlock plug on oil condition sensor and disconnect |
NOTE:
Check stored fault messages.
Delete fault memory.