Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Read out fault memory of DME control unit
Switch off ignition
If necessary, remove radiator cover

Unlock plug (1) and remove.

Release bolt.

Installation:

Replace screw.

Tightening torque 12 14 4AZ .

Remove pulse generator (2).

Fig 1: Identifying Plug And Pulse Generator

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check stored fault messages.

Now clear the fault memory.