LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2594 (Engine Electrical System - Repair - E90 (N52)) >> 1214 Electronic Switching Or Contr.Units >> 12 14 521 Replacing crankshaft pulse generator (N52, N52K, N51, N53) >> Replace aluminium screws

Replace aluminium screws

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Tightening torque 12 14 2AZ .

Withdraw pulse generator (2) from crankcase.

Installation: 

Replace sealing ring.

Fig 1: Removing Plug From Crankshaft Pulse Generator
G04751285Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Check stored fault messages.

Delete fault memory.

scientia non olet · About LEMON Manuals