Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- Read out fault memory of DME control unit.
- Check stored fault messages
- Switch off ignition
- Remove IGNITION COIL COVER
Unlock plug retainer of ignition coil (1) and disconnect plug.
Pull ignition coil (1) up and out.
This procedure is applicable to all ignition coils.