LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2593 (Fuel System - Repair -- E90 (N52)) >> 1362 Sensor For Control Unit >> 13 62 010 Removing and installing/replacing fuel differential-pressure sensor (N52/N52K/N51) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Release screws.

Unlock plug (1) and remove.

Pull differential pressure sensor (2) out of intake air manifold.

Fig 1: Pulling Differential Pressure Sensor From Intake Air Manifold
G04725732Courtesy of BMW OF NORTH AMERICA, INC.